Activated carbon filter element is made by adding activated carbon particles to binder and heating and sintering. The innermost layer of the filter element is polypropylene skeleton, which is used to strengthen the pressure strength of the filter element. The bone frame is covered with two layers of polypropylene microfiber felt that can trap liquid particles larger than 10 microns through the carbon core. The carbon core is coated with two layers of polypropylene superfine fiber felt, which can intercept particles larger than 10-20 microns in the liquid, making the filter core have the dual functions of filtration and purification. The outer layer is white plastic mesh cover, so that the filter element has a complete appearance and clean appearance. Both ends of the filter element are equipped with soft butadiene rubber end cover, so that the filter element has good sealing property after being put into the filter cylinder. The finished activated carbon filter element is tightly sealed with plastic film to prevent the filter element from being polluted and keep the filter element in a fresh state.

Activated carbon filter element has a good adsorption, can effectively remove residual chlorine, odor, color and organic matters in the water。